Du har indtastet en værdi, som indeholder ugyldige tegn, i nedenstående fremhævede felter. Gennemse dit valg, og brug kun gyldige tegn.

Produktet er muligvis ikke et nøjagtigt match til din søgning

Du har tidligere købt dette produkt. Se i ordrehistorik

 
 

MCP1630DM-LED2

Development Kit, MCP1630 Boost Mode LED Driver, PWM Dimming, 1 Output

MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
MICROCHIP MCP1630DM-LED2
×
×

Billedet er vejledende. Se produktspecifikationen.

Producentens varenummer:
MCP1630DM-LED2
Varenummer:
1578365
Se alle tekniske dokumenter

Produktoversigt

The MCP1630DM-LED2 is a MCP1630 boost mode LED driver demo board, which is a step up, switch mode, dc to dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with a jumper selection. Other output currents can be obtained with minor modifications to the board. The MCP1630 boost mode LED driver demo board utilises MCP1630V high speed pulse width modulator. The 8 pin MCP1630V device contains the analog components necessary for an analog switch mode control loop including an error amplifier, PWM comparator, and a high current driver pin. The switching frequency and maximum duty cycle for the MCP1630V are determined by an external clock source. An 8 pin PIC12F683 microcontroller is used to provide a 500KHz switching clock for the MCP1630. In addition, the PIC12F683 firmware supervises the circuit output voltage and can optionally dim the LEDs when a potentiometer is attached.
  • Compact size with high output power
  • High efficiency over entire operating input voltage range
  • Selectable output current 350mA or 700mA
  • 30W maximum output power
  • Optional software dimming control
  • Factory programmed source code provided
  • Switching frequency, maximum duty cycle, and MCP1630 reference voltage can be modified in firmware
  • Additional application functions can be provided in firmware

Applikationer

Power Management, Embedded Design & Development, LED Lighting

Indhold

MCP1630 Boost Mode LED Driver Demo Board, A PCB containing a string of LEDs, Analog and Interface Products Demonstration Boards CD ROM

Fodnoter

90 Day Warranty only. After Expiration of Warranty returns must be processed via Microchip.

Produktoplysninger

Vil du at se lignende produkter? Vælg blot de ønskede attributter nedenfor og tryk på knappen ×


:
Boost (Step Up)

:
1Outputs

:
700mA

:
-

:
9V

:
16V

:
MCP1630

:
PWM

:
Board, Users Guide

:
-

Find lignende produkter Vælg og tilpas attributterne ovenfor for at finde lignende produkter.

Tekniske dokumenter (3)

CAD Downloads

×

Salgs- og leveringsbetingelser

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Accepter Annuller

4 På lager Brug for flere?

Bestil inden kl. 18:00

Hos dig næste arbejdsdag

På grund af markedsforhold er leveringstiderne kun til generel vejledning og kan ændres med kort varsel

kr 275,04

Priser er ikke tilgængelige. Kontakt kundeservice.

Pris for:
Styk
Flere: 1 Minimum: 1
Antal Pris Din pris
 
 
1+ kr 275,04
Kampagnepris
Kontraktpris
Kun webpris
Kun webkontaktpris
 
 
 

Priser er ikke tilgængelige. Kontakt kundeservice.

No longer stocked:: No Longer Manufactured::
Føj til indkøbskurv Føj til indkøbskurv Forudbestil
Tilføj
Vare med begrænsninger
Tilføj varenr. / Linjenote
Total:
Total: ( )
Total: --