ZXCT1009QFTA

ZXCT1009QFTA is an automotive-grade micropower current monitor. This device eliminates the need to disrupt the ground plane when sensing a load current. It takes a high side voltage developed across a current shunt resistor and translates it into a proportional output current. A user-defined output resistor scales the output current into a ground-referenced voltage. The wide input voltage range of 20V down to as low as 2.5V makes it suitable for a range of applications. A minimum operating current of just 4µA, combined with a SOT23 package make it a unique solution for portable battery equipment. It is used in applications such as automotive current measurement, automotive DC motor stall detection, over current monitoring.

• Low cost, accurate high-side current sensing
• Output voltage scaling, upto 2.5V sense voltage
• Supply voltage range from 2.5V to 20V
• Output current is 4µA typical at (VSENSE = 0V, TA = +25°C, VIN = 5V, ROUT = 100 ohm)
• Sense voltage is 2500mV maximum at (TA = +25°C, VIN = 5V, ROUT = 100 ohm)
• VSENSE- input current is 100nA maximum at (TA = +25°C, VIN = 5V, ROUT = 100 ohm)
• Accuracy is 2.5% maximum at (TA = +25°C, VIN = 5V, ROUT = 100 ohm)
• Bandwidth is 2MHz typical at (VSENSE(DC) = 100mv, RF PIN = -20dBm)
• Operating temperature range from -40°C to +85°C
• SOT23 package

Advarsler

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.