Du har indtastet en værdi, som indeholder ugyldige tegn, i nedenstående fremhævede felter. Gennemse dit valg, og brug kun gyldige tegn.
Produktet er muligvis ikke et nøjagtigt match til din søgning
Du har tidligere købt dette produkt.
Se i ordrehistorik
19288
ESD Tester, Wrist Strap and Footwear Tester with Stand
- Producentens varenummer:
- 19288
- Varenummer:
- 3250255
Produktoplysninger
Vil du at se lignende produkter? Vælg blot de ønskede attributter nedenfor og tryk på knappen ×
- :
- Wrist Strap and Footwear Tester with Stand
- :
- -
Tekniske dokumenter (1)
CAD Downloads
--Vælg venligst...
✔
--Vælg venligst...
×
Salgs- og leveringsbetingelser
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Produktoversigt
Combo tester X3 with 10mm adapter & stand verifies the functionality of personnel grounding devices (wrist straps1 , foot grounders, ESD shoes, smocks2 ). Three independent tests are performed simultaneously on the wrist strap and each foot. Green lights indicate a pass condition. Red and yellow lights plus an audible alarm indicate when the wrist strap and/or footwear (left or right) have failed. DIP switches may be accessed for test limit preferences. Access control to an ESD Protected Area can be further enforced by using the relay terminal on the Combo Tester X3 and connecting it to an electronic door lock or turnstile to grant access only to those who have passed their personnel grounding device tests. The Combo Tester X3 is calibrated to NIST standards and includes a certificate.
Indhold
1 x combo tester X3, 1x 10mm adapter, 1 x dual foot plate, 1 x power adapter 12VDC with interchangeable plugs(North America, UK/Asia, Europe), 1 x foot plate cord 1.8m, 1 x ground cord, 1 x pedestal (two pieces), 1 x base plate, 5 x socket head screws 1/4-20 x 1/2", 2 x Philips head screws 10-32 x 5/8", 2 x nuts 10-32, 2 x spacers, 1 x certificate of calibration.
Tilgængelig for producentens leveringstid 22 uger
Bestil nu. Betal intet før produkterne er afsendt
×
22
Du kan reservere fra lager nu bestil bare det ønskede antal og gå til kassen som normalt. Den mængde, der ikke kan sendes nu, placeres i restordre og sendes så snart vi får en levering fra vores leverandør. Du opkræves først, når produkterne afsendes til dig.
På grund af markedsforhold er leveringstiderne kun til generel vejledning og kan ændres med kort varsel
Total:
Total: ( )
Total: --
Filtreringsværktøj