A000060

The A000060 is a Arduino Ethernet without PoE + USB2SERIAL development board. It is based on Atmega8U2 microcontroller on the Arduino Uno, and incorporating a Wiz Net W5100 TCP/IP embedded Ethernet controller. It can be programmed like an Uno via a six pin FTDI style serial connector. The Arduino USB to serial adapter or any FTDI style USB to serial connector can be used to program it. A separate power over Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available. The USB2Serial Board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It features the Atmega8U2 programmed as a USB to serial converter.

• Atmega8U2 programmed as a USB to serial converter
• Support hardwired TCP/IP Protocols TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
• Support auto MDI/MDIX
• Supports four independent sockets simultaneously
• Internal 16Kbytes memory for Tx/Rx buffers
• The USB serial connector has an ISCP interface

Applikationer

Communications & Networking, Automation & Process Control, Industrial, Sensing & Instrumentation, Metering, Consumer Electronics