LTC3589EUJ-2#TRPBF

LTC3589-2 is an 8-output regulator with sequencing and I²C. It is a complete power management solution for ARM and ARM-based processors and advanced portable microprocessor systems. The device contains three step-down DC/DC converters for core, memory, and SoC rails, a buck-boost regulator for I/O at 1.8V to 5V and three 250mA LDO regulators for low noise analogue supplies. Regulator start-up is sequenced by connecting outputs to enable pins in the desired order or programmed via the IC port. System power-on, power-off, and reset functions are controlled by the pushbutton interface, pin inputs, or I²C interface. Application includes hand held instruments and scanners, portable industrial devices, automotive infotainment, medical devices, high-end consumer devices, multi-rail systems, supports NXP i.MX53/51, Marvell PXA, and other application processors.

• Pushbutton ON/OFF control with system reset
• Flexible pin-strap sequencing operation, I²C and independent enable control pins
• Power good and reset outputs, dynamic voltage scaling and slew rate control
• Always-alive 25mA LDO regulator, triple 250mA LDO regulators
• Operating input supply voltage, VIN range from 2.7 to 5.5V (TA = 25°C)
• Typical oscillator frequency is 2.25MHz (TA = 25°C)
• Maximum duty cycle is 100% (VFB = 0V, TA = 25°C, minimum)
• Minimum feedback voltage range from 0.351 to 0.374V (BxDTV1 = BxDTV2 = 00000, VIN = 2.7V to 5.5V)
• 40-lead plastic QFN package
• Temperature rating range from -40°C to 125°C

Noter

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party