58495-2
Crimp Tool Die, SDE, Multimate Type III+ and Type VI Contacts, 354940-1 PRO-CRIMPER III Hand Tool
10 Du kan reservere fra lager nu
| Antal | |
|---|---|
| 1+ | kr 1.505,000 |
| 5+ | kr 1.395,000 |
| 10+ | kr 1.350,000 |
| 25+ | kr 1.293,000 |
| 50+ | kr 1.268,000 |
| 100+ | kr 1.247,000 |
Produktoplysninger
Produktoversigt
The 58495-2 is a SDE Die Set for 28 to 16AWG Multimate type III+ and type VI contacts. This SDE die set consists of crimping dies and a locator assembly and it features a wire anvil, an insulation anvil, a wire crimper, and an insulation crimper. Die retaining pins and die retaining screws are used to position and secure the dies in the tool frame. A nut is used on the upper die retaining screw to hold the locator assembly in place.
- Crimp Form-Wire Barrel Type: Open Barrel - F Crimp
Applikationer
Maintenance & Repair
Advarsler
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Tekniske specifikationer
Multimate Type III+ and Type VI Contacts
-
354940-1 PRO-CRIMPER III Hand Tool
No SVHC (25-Jun-2025)
Tekniske dokumenter (2)
Tilknyttede produkter
6 produkter blev fundet
Lovgivning og miljø
Det land, hvor den sidste væsentlige fremstillingsproces fandt stedOprindelsesland:United States
Det land, hvor den sidste væsentlige fremstillingsproces fandt sted
Certifikater om produktoverholdelse