Du har indtastet en værdi, som indeholder ugyldige tegn, i nedenstående fremhævede felter. Gennemse dit valg, og brug kun gyldige tegn.
Produktet er muligvis ikke et nøjagtigt match til din søgning
Du har tidligere købt dette produkt.
Se i ordrehistorik
NRX2-434.650-10
RF MOD, RX, FM, 434.650MHZ, 10KBPS
- Producent:
- RADIOMETRIX RADIOMETRIX
- Producentens varenummer:
- NRX2-434.650-10
- Varenummer:
- 1348837
- Teknisk datablad:
- NRX2-434.650-10 Datablad
Produktoversigt
NRX2-434.650-10 is an UHF narrow band FM receiver working at 434.650MHz frequency. The NTX2 transmitter and NRX2 receiver offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print. This makes the NTX2/NRX2 pair ideally suited to those low power applications where existing single frequency wideband UHF modules have insufficient range. NTX2 HP (25mW) variant can be used in applications where greater radiated power is desired. NTX2 & NRX2 modules combine effective screening with internal filtering to minimise spurious radiation and susceptibility thereby ensuring EMC compliance. They are particularly suitable for point to point and point to multipoint wireless links where longer ranges are required at low data rates.
- Double conversion FM superhet
- SAW band pass filter, image rejection: 50dB
- Data bit rate: 10kbps max.
- Receiver sensitivity: -118dBm (for 12dB SINAD) and -112dBm (for 1ppm BER)
- Local Oscillator (LO) re-radiation: <-60dBm
- Conforms to ETSI EN 300 220-3 (radio) and EN 301 489-3 (EMC)
- Usable range over 500m
- 25kHz Channel spacing
- Longer range compared to Wide Band FM modules
Applikationer
Building Automation, Security, Portable Devices, Industrial, Communications & Networking
Produktoplysninger
Vil du at se lignende produkter? Vælg blot de ønskede attributter nedenfor og tryk på knappen ×
- :
- FM
- :
- 10Kbps
- :
- 434.65MHz
- :
- -112dBm
- :
- 2.9V
- :
- 15V
- :
- 14mA
- :
- -
- :
- Radio Communications
- :
- -
Tekniske dokumenter (1)
CAD Downloads
--Vælg venligst...
✔
--Vælg venligst...
×
Salgs- og leveringsbetingelser
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Produceres ikke længere
Total:
Total: ( )
Total: --
Filtreringsværktøj