Du har indtastet en værdi, som indeholder ugyldige tegn, i nedenstående fremhævede felter. Gennemse dit valg, og brug kun gyldige tegn.
Produktet er muligvis ikke et nøjagtigt match til din søgning
Du har tidligere købt dette produkt.
Se i ordrehistorik
XTRINSIC-SENSORS-EVK
Evaluation Kit for NXP Xtrinsic Sensors using FRDM-KL25Z Platform
- Producent:
- NXP NXP
- Producentens varenummer:
- XTRINSIC-SENSORS-EVK
- Varenummer:
- 2308734
- Teknisk datablad:
- XTRINSIC-SENSORS-EVK Datasheet
Alternativer til XTRINSIC-SENSORS-EVK
Produktoversigt
The XTRINSIC-SENSORS-EVK is an evaluation kit that comes with a sensor board together with the FRDM-KL25Z platform. The software drivers and code enable engineers to easily evaluate and demonstrate the performance of the sensors in a variety of applications. The sensor board comes equipped with three of new generation XTRINSIC MEMS sensors. The MPL3115 is designed for accurate measurement of altitude and pressure, the MAG3110 for detection of magnetic fields, and the MMA8491 for measurement of physical positions. The FRDM-KL25Z features a KL25Z128VLK a KL2 family device boasting a max operating frequency of 48MHz, 128KB of flash, a full speed USB controller and loads of analog and digital peripherals. The FRDM-KL25Z has an easy access to MCU I/O via Arduino R3 compatible I/O connectors. The freedom board also features a programmable OpenSDA debug interface.
- MPL3115A2 is a highly precise altitude and pressure sensor
- Pressure range from 20kPa to 110kPa
- Less than 1foot/0.3m resolution
- MAG3110 is a low power digital 3D magnetic sensor
- Measuring local magnetic fields up to 10Gauss
- MMA8491Q is a 3 axis accelerometer
- Ultra low power tamper detection and tilt sensor
- FRDM-KL25Z is a freedom development platform
- Host platform for the Xtrinsic sensors based on the Kinetis KL25z MCU
Applikationer
Sensing & Instrumentation, Communications & Networking, Consumer Electronics, Portable Devices, Medical, Wireless
Indhold
Xtrinsic Sensors Board, FRDM-KL25Z board, Quick start guide.
Fodnoter
If possible, use antistatic devices, such as wrist straps and floor mats while using the board.
Advarsler
ESD sensitive device, take proper precaution while handling the device.
Produktoplysninger
Vil du at se lignende produkter? Vælg blot de ønskede attributter nedenfor og tryk på knappen ×
- :
- Sensing - Sampling Kit / Related Components
- :
- NXP
- :
- KL25Z, MAG3110, MMA8491, MPL3115
- :
- -
- :
- Xtrinsic Sensor Board, Freedom FRDM-KL25Z Evaluation Board
- :
- -
Tekniske dokumenter (2)
CAD Downloads
--Vælg venligst...
✔
--Vælg venligst...
×
Salgs- og leveringsbetingelser
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Lagerføres ikke længere
På grund af markedsforhold er leveringstiderne kun til generel vejledning og kan ændres med kort varsel
Total:
Total: ( )
Total: --
Filtreringsværktøj