Du har indtastet en værdi, som indeholder ugyldige tegn, i nedenstående fremhævede felter. Gennemse dit valg, og brug kun gyldige tegn.
Produktet er muligvis ikke et nøjagtigt match til din søgning
Du har tidligere købt dette produkt.
Se i ordrehistorik
STAR-XL-S08
S08MM128 XL STAR ACCELEROMETER DEMO BRD
- Producent:
- NXP NXP
- Producentens varenummer:
- STAR-XL-S08
- Varenummer:
- 1864565
- Teknisk datablad:
- STAR-XL-S08 Datasheet
Produktoversigt
The STAR-XL-S08 is a development board featuring MC9S08MM128 8bit microcontroller. On a single board this board combines a 8bit HCS08 MM128MM128 microcontroller, MMA8451Q three axis accelerometer, MC34673MC34673 battery charger and a open source BDM interface. Demonstrate and evaluate any or all of these devices, with the preloaded demo program that illustrates orientation, shake, tap, freefall and transient mode applications, at three user selectable sensitivities and two accuracies (8bit and 14bit data). The XL_STAR even automatically goes into sleep or wake mode based on movement of the board. The XL_STAR is a double sided board. It may be simplest to imagine that the two sides are separate circuit boards that are stuck together. In normal use, when the XL_STAR board is not connected to a PC for debugging, most of the circuit on the bottom side of the board is not powered. The only thing in use is the battery.
- Offers a complete microcontroller development environment
- Precision analogue front end
- Ultra low power operation
- Up to 78 GPIO
- Up to 128KB flash and 12KB SRAM
- Easily extensible to 32bit Flexis platform for more demanding applications
- Simple programming interface via open source BDM
- Three embedded channels of motion detection
- USB connectivity
- ±2g/±4g/±8g dynamically selectable full scale
Applikationer
Medical, Test & Measurement, Sensing & Instrumentation, Industrial, Consumer Electronics, Medical, Sensing & Instrumentation, Embedded Design & Development
Indhold
XL-STAR Board, Battery, USB cable, CodeWarrior special edition IDE.
Fodnoter
When using XL_STAR for USB development, via J1 (top side of the XL_STAR), the XL_STAR must be powered via a USB cable connected to J6 (underside of the XL_STAR) before a USB cable is connected to J1.
Advarsler
Do not update the OSBDM firmware on the XL_STAR board and doing so wrongly can render the board unusable.
Produktoplysninger
Vil du at se lignende produkter? Vælg blot de ønskede attributter nedenfor og tryk på knappen ×
- :
- NXP
- :
- 8bit
- :
- Flexis - S08MM
- :
- HCS08
- :
- HCS08
- :
- MC9S08MM128
- :
- XL_STAR Board, CodeWarrior Special Edition IDE, USB cable, Battery
- :
- -
Tekniske dokumenter (5)
CAD Downloads
--Vælg venligst...
✔
--Vælg venligst...
×
Salgs- og leveringsbetingelser
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Bedst sælgende
1.360 På lager
1.360 på lager til levering næste dag (UK lager) :Bestil inden kl. 18:00 (for opspolede varer 17:30) Man - Fre (Ekskl. helligdage)
Hos dig næste arbejdsdag
×
Bestil inden kl. 18:00
Mandag til fredag med undtagelse af nationale helligdage
På grund af markedsforhold er leveringstiderne kun til generel vejledning og kan ændres med kort varsel
Leveres så længe lager haves
Total:
Total: ( )
Total: --
Filtreringsværktøj