SN74LVTH125DBR

The SN74LVTH125DBR is a quadruple Bus Buffer designed specifically for low-voltage (3.3V) VCC operation, but with the capability to provide a TTL interface to a 5V system environment. It features independent line drivers with 3-state outputs. Each output is in the high-impedance state when the associated output-enable (OE)\ input is high. Active bus-hold circuitry holds unused or un-driven inputs at a valid logic state. Use of pull-up/pull-down resistors with the bus-hold circuitry is not recommended. When VCC is between 0 and 1.5V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5V, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. The IOFF circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

• Supports mixed-mode signal operation
• IOFF and power-up 3-state support hot insertion
• Bus hold on data inputs eliminates the need for external pull-up/pull-down resistors
• Latch-up performance exceeds 500mA per JESD 17
• <lt/>0.8V at VCC = 3.3V, TA = 25°C VOLP (output ground bounce)
• Green product and no Sb/Br

Applications

Industrial, Signal Processing, Wireless, Consumer Electronics, Communications & Networking