Du har indtastet en værdi, som indeholder ugyldige tegn, i nedenstående fremhævede felter. Gennemse dit valg, og brug kun gyldige tegn.

Produktet er muligvis ikke et nøjagtigt match til din søgning

Du har tidligere købt dette produkt. Se i ordrehistorik

 
 

DFR0767

IoT Router Carrier Board, BCM2711, ARM, Cortex-A72, Raspberry Pi Compute Module

DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767

Billedet er vejledende. Se produktspecifikationen.

Producentens varenummer:
DFR0767
Varenummer:
3879661

Produktoplysninger

Vil du at se lignende produkter? Vælg blot de ønskede attributter nedenfor og tryk på knappen ×


:
Broadcom

:
ARM

:
Cortex-A72

:
BCM2711

:
BCM2xxx

:
Raspberry Pi Compute Module

:
1 x Compute Module 4 IoT Router Carrier Board Mini

:
-

Find lignende produkter Vælg og tilpas attributterne ovenfor for at finde lignende produkter.

Tekniske dokumenter (0)

CAD Downloads

×

Salgs- og leveringsbetingelser

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Accepter Annuller

Produktoversigt

Raspberry Pi compute module 4 IoT router carrier board mini. This is an internet expansion board based on the Raspberry Pi compute module 4. When connecting with a gigabit network card via PCle, it brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage and higher stability for a long time work compared with a USB network card. Besides with a mini size of 55 x 62mm, the board still retains the characteristic GPIO pin header of Raspberry Pi which makes it applicable for connecting other actuators, sensors and smart cooling fan. Furthermore, there is also a USB2.0 interface that can be connected to mobile hard drives, printers, WI-FI modules, LTF modules, etc. The powerful performance of BCM2711 4 core 1.5GHz Cortex-A72 and the rich software support in the Raspberry Pi community make this board a solid foundation for building high-performance gateways, smart routers and home IoT platforms.
  • Provides OpenWRT open-source router system
  • Compatible with Raspberry OS, Ubuntu server and other Raspberry Pi systems
  • Ethernet: ETH1: compute module 4 built-In and ETH2: PCI express 1000BASE-T NIC
  • 1x USB-C: power only and 1x USB-C: USB 2.0 high speed
  • Storage card: microSD slot (Only modules without eMMC supported)
  • GPIO: 26pin GPIO compatible with Raspberry Pi
  • Power supply: USB-C 5V/3A
  • Operating temperature range 0°C to 80°C
  • Connected to peripherals and used as a mini-NAS, wireless network bridge, or LTE Internet terminal

Indhold

CM4 IoT router carrier board mini, Acrylic case with heatsink.

Bedst sælgende

75 På lager Brug for flere?

Bestil inden kl. 18:00

Hos dig næste arbejdsdag

På grund af markedsforhold er leveringstiderne kun til generel vejledning og kan ændres med kort varsel

kr 290,23

Priser er ikke tilgængelige. Kontakt kundeservice.

Pris for:
Styk
Flere: 1 Minimum: 1
Antal Pris Din pris
 
 
1+ kr 290,23
Kampagnepris
Kontraktpris
Kun webpris
Kun webkontaktpris
 
 
 

Priser er ikke tilgængelige. Kontakt kundeservice.

No longer stocked:: No Longer Manufactured::
Føj til indkøbskurv Føj til indkøbskurv Forudbestil
Tilføj
Vare med begrænsninger
Tilføj varenr. / Linjenote
Total:
Total: ( )
Total: --